<span id="xvbfv"><dl id="xvbfv"></dl></span>
<span id="xvbfv"></span>
<th id="xvbfv"></th>
<span id="xvbfv"><video id="xvbfv"><ruby id="xvbfv"></ruby></video></span>
<span id="xvbfv"></span>
<strike id="xvbfv"><dl id="xvbfv"></dl></strike>
光模塊
光模塊
All categories

Current position:Product Center / Subsystem product

Subsystem product

Recommended products

Passive WDM system
Passive WDM system is mainly used to increase the fiber capacity, which can greatly improve the efficiency of the fiber and improve the utilization rate of fiber.??Multiple channels can be multiplexed and transmitted in 1 or 2 optical fiber cables by using passive wavelength splitter or color optical wavelength filter.
More 白箭頭 黑箭頭
0.00
編號:
SFP
STM-1~ STM-16 and low-speed Ethernet SFPs are supporting optical fiber transmission from 2km to 80km. Longer transmission distances can be realized based on specific customer requirements. SFPs support hot pluggablity and have the characteristics of low power consumption, small size and wide application scenarios. ? Taclink OSC optical Transceiver modules support 1491nm / 1511nm / 1625nm / 1645nm and other wavelengths up to 240 km non-amplified transmission distances. In addition also a single fiber bi-directional (BIDI) version 1491nm / 1511nm is available.
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
6G/10G SFP+ optical Transceiver supports optical fiber transmission from 300m up to 80km, which are widely used in wireless application. They are optimized for low power consumption, small size and hot pluggability. ? Beseides the SFP+ modules for wireless applications Taclink has the full range of SFP+ modules, including BIDI SFP+ and CWDM SFP+ for a 10km - 80km transmission range .
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
25G SFP28 series optical Transceiver supports optical fiber transmission from 100m to 40km. Models with longer transmission distance without amplification can be supported by customization. 25G SFP28 supports hot-pluggability, featuring low power consumption, small size and wide application scenarios.??Besides standard SFP28 Taclink has a full range of 5G SFP28 transceiver for fronthaul applications , including CWDM/ MWDM (with OAM)/ LWDM (with OAM) wavelengths and different link budget types.
0.00
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
編號:
TO
編號:
Number of views:
1000
Keywords:
0.00
編號:
400G PAM4 QSFP-DD optical Transceiver series comply with IEEE 802.3CN 400GBASE Ethernet protocol, 400GAUI-8 C2C interface standard and QSFP-DD MSA standards. Based on coherent DPSK or 4-channel CWDM DSP PAM4 modulation,??the maximum transmission data rate is 425Gbit/s and the transmission distance is 500m to 40KM.??It meets RoHS 6 environmental requirements and applies to 400GB Ethernet, data center, 5G back networks, and metro networks.
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
200G PAM4 QSFP-DD optical Transceiver series complies with IEEE 802.3CN 200GBASE Ethernet protocol, 200GAUI-8 C2C interface standard and QSFP-DD MSA standard protocol specification. Based on 4-channel LAN-WDM wavelength division multiplexing technology and using DSP PAM4 modulation the transmission data rate is as high as 212.5Gbps and supports 10km to 40km single-mode optical fiber transmission.??It meets RoHS 6 environmental protection requirements and is mainly applied to 5G back hauling transmission networks and metro networks.
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
200G CFP2 series optical Transceiver modules adopt MDIO communication mode, based on 4-channel LAN-WDM wavelength division multiplexing technology and DSP PAM4 modulation. The transmission data rate is up to 212.5Gbps and supports single-mode fiber transmission of 10km~40km.??Compatible with IEEE 802.3CN,CFP/CFP2 MSA, mainly used in 200G Ethernet, 5G transmission, etc.
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
100G CFP/CFP2 series optical modules adopt MDIO communication mode, based on 4-channel LAN-WDM wavelength division multiplexing technology, adopt NRZ modulation, single channel 25.78125-27.952Gbps, support 10km~80km single-mode fiber transmission.??Compatible with IEEE802.3BM,CFP/CFP2 MSA, 100GBase-LR4 and ITU-T G.959.1 4I1-9D1F, CEI-28G-VSR interfaces, etc., mainly applied to 100G Ethernet, 100G OTU4 and metro networks.
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
50G PAM4 QSFP28 series complies with IEEE 802.3cn 50GBASE Ethernet protocol, 50GAUI-2 C2M and have a standard electrical interface. The maximum data rate is 53.125Gbps and the transmission distance is 10 to 40km in single-mode optical fiber.??It meets RoHS 6 environmental requirements and is mainly used in 5G middle haul and backhaul networks
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
40G QSFP+ series optical Transceiver modules, including 2km~10km single-mode optical fiber transmission, comply with 40G Ethernet IEEE 802.3BA, 40GBASE standard, QSFP+ MSA protocol requirements, and support hot pluggability. The data rate of each channel is up to 11.2Gbps. The four CWDM channels MUX/DEMUX are designed for medium and long distances over single mode fiber (SMF). The modules are RoHS compliant.??Mainly used in 40G Ethernet highspeed wireless and data center interconnections.
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
The 100G QSFP28 single-wavelength series is compliant with the 100G Single Lambda MSA standard and adopts the standard QSFP28 package. The modules realizes a single fiber bi-directional full-duplex transmission link.??The electrical interface complies with IEEE 802.3BM CAUI-4 standard and adopts 4*25G NRZ encoded signals, which is fully compatible with the electrical interface side of the existing 100G QSFP28 dual-fiber solution.??PAM4 encoded signal with 53.125G baud rate (bit rate: 106.25GB /s) on the optical interface is mainly used in 100G Ethernet, 100G OTU4 and metro networks.
0.00
編號:
Number of views:
1000
Keywords:
0.00
編號:
100G QSFP28 optical Transceiver includes CWDM4, LR4, ER4 Lite, ER4, and ZR4 series for distances from 2km up to 80km.. The series uses LC or MPO optical connectors, and are compatible with IEEE 802.3bm, SFF-8636 SFF-8679 and other standards.??Supports QSFP28 hot-pluggability with low power consumption and small size, which increases data center capacity, improves port density, and reduces power consumption.??QSFP28 can be used in intra data center networks, data center interconnection, 100GE Ethernet or metro networks.
0.00
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
編號:
編號:
Number of views:
1000
Keywords:
Previous page
1
2
7

Wuxi Taclink Optoelectronics Technology Co., Ltd.

Helpline:

E-mail:

Company address:

Block 93-C, Science&Tech. Industry Park, Xinwu District, Wuxi, Jiangsu, PRC

Wuxi Taclink Optoelectronics Technology Co., Ltd.    all rights reserved   蘇ICP備17043295號

国产成人情侣激情小视频,337p日本欧洲亚洲大胆艺术96,免费a片短视频在线观看,夜夜添夜夜添夜夜摸夜夜摸